If you only require sample doors or a swatch please click here.
All Doors and Drawers are available Made to Measure.
If you are unsure about the exact range or dimensions you can change the Style/Finish/Sizes or Hinge Hole locations prior to ordering.
For help with hinge holes and some other advice please scroll to the bottom of this page.
If you require any help or advice please do not hesitate to contact us.
SURCHARGES: SHAKER = 20% ON ALL DOORS. HIGH GLOSS = 50% ON ALL DOORS, DRAWERS AND MATCHING ACCESSORIES.
 Click here to print this form
x
x
x
x
x
x
x
x
x
x
x
x  
x
x
x
x
x
x
 
x  
x  
x
x
x
Doors are sold undrilled for hinges as standard, but can be drilled for 50p a hole if required.
For made to measure kitchen doors we need to know:
1. The distance from the TOP EDGE of door to the CENTRE of the TOP hinge hole and
2. The distance from the BOTTOM EDGE of the door to the CENTRE of the BOTTOM hinge hole.
For made to measure wardrobe doors we need to know:
1. The distance from the TOP EDGE of door to the CENTRE of the TOP hinge hole and
2. The distance from the TOP EDGE of the door to the CENTRE of the SECOND TOP hinge hole and
3. The distance from the BOTTOM EDGE of the door to the CENTRE of the BOTTOM hinge hole and
4. The distance from the BOTTOM EDGE of the door to the CENTRE of the SECOND BOTTOM hinge hole.

In most cases we need to know which side the door will be hung from. This can be done by looking at the front FACE of the door, imagine that it is see-through.
Example:
If you look at your door and the handle is on the LEFT, (the hinges are therefore on the right) so it is Right Hand Hinged or RHH.

E+OE